INSTALLATION MATERIALS
REDGARD MAT
uncoupling mat
A waterproof, vapor-proof uncoupling membrane that can be used for crack-isolation in most tile, porcelain or natural stone installations, and can be applied over challenging substrates such as installation over green (young) concrete and single ply 19.2" (49 cm) o.c. wood framed floors. When exposed to excessive substrate movement it absorbs stress and preserves the surface and integrity of the tile.
FRACTURE FREE
crack prevention membrane
Ready-to-use, elastomeric, crack prevention membrane developed for protecting tile floors from cracks due to minor surface movement. Provides anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other nonstructural cracks. Suitable for all interior or exterior commercial and residential tile and stone installations. Easily applied with a roller or trowel. Meets A118.12 for crack isolation membranes.
MBP
multi-surface bonding primer
MBP Multi-Surface Bonding Primer is a single-component, water-based primer engineered to deliver superior adhesion on a variety of substrates where proper bonding is difficult. Specially formulated with aggregates and polymers to promote mechanical adhesion on non-porous substrates.
CRACKBUSTER PRO
crack prevention mat
A self-bonding, fabric-reinforced asphaltic mat that reduces crack transmission in tile and stone floors. For both full and partial floor applications, Crack Buster® Pro is an anti-fracture membrane for horizontal cracks up to 3/8" (9.5 mm). Its strong self-adhesive backing and uniquely designed surface provide secure bonding for all types of ceramic tile, natural stone and terrazzo.
DUROCK
cement board
Ready-to-use, elastomeric, crack prevention membrane developed for protecting tile floors from cracks due to minor surface movement. Provides anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other nonstructural cracks. Suitable for all interior or exterior commercial and residential tile and stone installations. Easily applied with a roller or trowel. Meets A118.12 for crack isolation membranes.
GO BOARD
waterproof tile backerboard
GoBoard® is the ultra-light, waterproof tile backer board from Johns Manville. It’s engineered for durability, yet is up to 80% lighter than cement boards. GoBoard® is easy to handle and can be cut right where it’s installed with a basic utility knife without crumbling or disintegrating. And, best of all, it has waterproofing already built-in.
WATERPROOF
waterproofing membrane
Ready-to-use, elastomeric, crack prevention membrane developed for protecting tile floors from cracks due to minor surface movement. Provides anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other nonstructural cracks. Suitable for all interior or exterior commercial and residential tile and stone installations. Easily applied with a roller or trowel. Meets A118.12 for crack isolation membranes. Meets Uniform Plumbing Code specifications for use as a shower pan liner.
MULTI FLOOR-SET
polymer modified thin-set
A basic, economical polymer modified thin-set mortar that meets ANSI A118.4 requirements. It offers good bond strength for tile installations over most surfaces. Apply over concrete, cement backerboards, masonry and existing ceramic tile without the need for additives.
MULTIBOND WHITE
polymer modified thin-set
Multi-Bond is a good bond strength, all-purpose bonding mortar for floor and wall tile projects. Fast setting, even in cool weather climates. Polymer-modified to ensure enhanced flexibility; smooth, easy troweling with consistent, long-lasting results. Meets ANSI A118.4 and A118.11 without the need for additives.
PROLITE
light weight poly-mod thin-set
Offers high flexibility and bond strength in a lightweight formula with excellent handling characteristics for a wide variety of floor and wall tile installations. ProLite® will not sag or slip on walls and offers non-slump performance for floor installations. Capable of thin-set or medium bed application up to 3/4" (19 mm) thick on horizontal surfaces after beat-in. ProLite® is 40% lighter than traditional mortars. contributes to LEED® certification
ACRYLPRO
ceramic tile adhesive
AcrylPro® Ceramic Tile Adhesive is a high performance, professional formula adhesive with the high bond strengths required for 8" x 8" (20 x 20 cm) ceramic floor tile installations; can be used with tile up to 18” x 18” (45 x 45 cm) but dry time significantly increases. Suited for ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile on walls or floors, AcrylPro provides maximum resistance to intermittent water exposure.
MASTER COLOR™ GROUT
poly-mod sanded grout
Master Color Grout is a polymer-modified, sanded grout for joint widths from 1/8" to 5/8" (3 to 15 cm). Provides exceptional color uniformity, high wear characteristics and stain resistance without the addition of latex admixtures. Excellent flexural and bond strength, color control, high compressive strength and minimal efflorescence. Resists bacteria, fungus, alkalis and is freeze/thaw stable when cured. Available in 37 colors. Exceeds ANSI A118.6.
DRY GROUT
non-sanded grout
DRY GROUT is non-sanded and formulated for grouting porous floor and wall tiles with joints up to 1/8" (3 mm) wide. Ideal for use with glazed tile and polished marble that can be scratched by sanded grout. It can be used for interior and exterior applications. Meets ANSI A118.6 specifications.
FUSION PRO
single component grout
A professional grade, single component grout with the stain resistance and color consistency of epoxy grouts, but with the workability of cement grouts. Fusion Pro is ready to use on all tiles including glass tiles and polished natural stone, for exterior and interior wall and floor use. Fusion Pro is a high performance, advanced patent pending formulation that features built-in Microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew.
DIMENSION RAPIDCURE
glass-filled urethane grout
Patented, water based formula that contains reflective, micro-glass beads and a translucent, urethane binder that reflect light and allow it to pass through grout joints and into the tile itself. This creates a variety of aesthetic effects in virtually all tile options available today. It may add an elegant sparkle and/or blend naturally with traditional tile and stone.
TRUCOLOR RAPIDCURE
pre-mixed urethane grout
Bostik TruColor® RapidCure™ Premium, Pre-Mixed, Urethane Grout is a patented, water-based, grout offering the ultimate in color accuracy, water resistance, and stain and crack protection. This breakthrough formulation installs up to 50% faster than traditional grouts, and never needs to be sealed.
GROUT ONCE!
grout sealer
GroutOnce can be used with Portland cement based grouts. It is suitable for all color-fast Portland based grouts and polymer reinforced grout. Is not for use with other liquid additives, epoxy, or urethane grout. GroutOnce is a permanent seal and does not require application of a topical sealer. When used properly GroutOnce! forms a LIFETIME seal, and NEVER requires re-application.
TILELAB SURFACEGARD
penetrating sealer
Provides unsurpassed invisible protection for marble, stone, porcelain, quarry and Saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing for easy cleanup. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas.